• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Connect to VPN Gate by Using L2TP/IPsec VPN Protocol This document describes how to connect to a VPN Relay Server of VPN Gate by using the L2TP/IPsec VPN Client which is bundled with the operating system. L2TP/IPsec VPN Client is built-in on Windows, Mac, iOS and Android. It is easier to configure than. L2TP/IPsec VPN is recommended before you try to use OpenVPN. However, some networks or firewalls block L2TP/IPsec packets. If L2TP/IPsec fails,. Connecting parameters for L2TP/IPsec VPN You can quickly configure your L2TP/IPsec VPN Client by using the following parameters if you have already known how to set up.

This document introduces how to set up Main mode IPsec Tunnel between two Vigor Routers.IPsec VPN with Main mode use the IP address of VPN client as identifier, and the IP address must be set on VPN server; therefore, if the VPN client doesn't have a static IP, please use Aggressive mode instead.

Free software for mac os x. • IP Address / Hostname: Username: vpn, Password: vpn Pre-shared Key (Secret): vpn Select your OS • • • • VPN on Windows step by step guide (Using L2TP/IPsec VPN) Here is the instruction how to connect to a VPN Gate Public VPN Relay Server by using L2TP/IPsec VPN Client which is built-in on Windows XP, 7, 8, 10, RT, Server 2003, 2008 and 2012. • L2TP/IPsec Client configurations are difficult than SoftEther VPN Client.

If you are using Windows, using SoftEther VPN Client is recommended because it is very easy to configure and stable. SoftEther VPN Client can show the list of currently running VPN Gate Servers on the software screen. On this instruction, we use Windows 7 screens. Windows XP and Windows 8 are similar, however there are a little number of changes. Initial configurations (only once at the first time) Right-click the network icon on the bottom-right side of Windows screen, and click 'Open Network and Sharing Center'.

Click 'Set up a new connection or network' on the 'Network Sharing Center'. Select 'Connect to a workplace'.

Select 'Use my Internet connection (VPN)'. Open the page and choose a VPN Server which you want to connect. Copy the DDNS Hostname (an identifier ends with '.opengw.net' ) or IP Address (digits as xxx.xxx.xxx.xxx) and paste it on the 'Internet address' field on the configuration wizard. • In general, DDNS Hostname (an identifier ends with '.opengw.net' ) are recommended to specify. DDNS hostname can continue to be used even if the corresponding IP address of the DDNS hostname will change in future. However, in some countries or regions, you might be unable to use DDNS hostname.

If you fails to specify a DDNS hostname, try IP Address (digits as xxx.xxx.xxx.xxx) specification instead. After you paste the 'Internet address', check 'Don't connect now; just set up so I can connect later' checkbox on the bottom of the screen surely. If the username and password prompting screen appears, input 'vpn' (3-letters) on both username and password field. You should check 'Remember this password'. When 'The connection is ready to use' message appears, click the 'Close' button. Do not click the 'Connect now' button. Go to 'Network and Sharing Center' and click 'Change adapter settings'.

The currently defined VPN connection settings are listed. Right click the icon you created in the previous step, and click 'Properties'. On the Properties screen, switch to the 'Security' tab. (In Windows XP, switch to the 'Network' tab.) Choose 'Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)' on the 'Type of VPN' drop-down list. Next, click the 'Advanced settings' button.

(In Windows XP, click the 'IPsec Settings' on the 'Security' tab.) The following screen will appear. Click 'Use preshared key for authentication' and input 'vpn' (3-letters) on the 'Key' field. After the above configuration finished, click the 'OK' button twice to close the property screen of the VPN connection setting. Connect to the VPN Server Double-click the created VPN connection setting, the below screen will appear.

'User name' and 'Password' fields should be filled automatically if you enable password-saving options in previous steps. If not, input 'vpn' on both 'User name' and 'Password' fields. Click the 'Connect' button to start the VPN connecting attempts. While the VPN is trying to be established, the following screen displays statuses. If an error occurs, confirm your settings make sure that the type of VPN is 'L2TP/IPsec', and the pre-shared key is correctly specified. Microsoft excel for mac 2008 how to highlight duplicates in mac free. If the VPN connection is successfully established, a VPN connection icon will be listed on the screen which appears when you click the network icon on the bottom-right of Windows screen. The status of the VPN connection icon should be 'Connected'.